9) "ENGINE DIAGNOSIS - MIL" LIGHT (AMBER YELLOW).
It turns on in the case of "engine" errors that in some cases will lock the engine.
10) ABS LIGHT (AMBER YELLOW).
Indicates ABS status.
Speed below 5 Km/h (3 mph)
Light OFF Light flashing Light steady on
- ABS enabled but not yet function-
ing since initialisation is in progress
or there is a fault of the IMU control
unit
ABS disabled and/or not functioning
due to a fault in the ABS control unit
Speed above 5 Km/h (3 mph)
Light OFF Light flashing Light steady on
ABS enabled and functioning ABS enabled but a fault is detected
by the IMU control unit
ABS disabled and/or not functioning
due to a fault in the ABS control unit
32
To Next Page