Motorcycle speed
The instrument panel receives information about the
actual motorcycle speed (calculated in km/h) and
displays the value increased by 5% and converted in
the set unit of measurement (km/h or mph).
A string of dashes "- - -" is displayed with the set unit
of measurement if:
- speed is equal to 299 km/h or 186 mph or if
instrument panel is not receiving the speed value
("- - -" steady ON);
- the rear speed sensor is in fault (flashing "- - -").
Considering that the FULL, CORE and OFF ROAD
layouts show the values for this function in a similar
to the TRACK layout, the example shown depicts the
function in TRACK layout.
Note
If the instrument panel does not receive any
information on the unit of measurement, the last unit
of measurement set is displayed flashing.
64
To Next Page