Removing and the seats
Use lock (1) to remove the passenger seat (2) and
reach the tail guard
Removing the passenger seat
●
the key into the lock (1);
●
Turn the key counter clockwise until the
passenger seat (2) catch disengages with an
audible click;
●
Pull the passenger seat (2) towards the front end
of the vehicle until releasing it.
the passenger seat
●
Before the passenger seat (2), make
sure that passenger strap (3) is correctly
positioned.
●
Slide the passenger seat (2) from vehicle front
(A) end towards the rear end (B) until hearing the
catch click into place.
To close the seat cover it from the
motorcycle side and slide it towards the rear side
until hearing the engagement click.
Fig 6
Fig 7
28