Ducati PRO-1 - Stem and Handlebar Adjustments

09
Model Reference picture * Adjustment
Pro-I Evo black &
white edition
Wobbly handlebar stem
If the handlbar stem is wobbly, you can tighten
the screws on the folding system using the
wrench supplied.
Pro-II Plus
Pro-II Evo
Pro-III
Adjust the handlebar:
If the handlebar stem vibrates during use, adjust
the screw by means of the hexagon wrench as
illustrated in the figure.
CAUTION

assembly or adjustments occur, do not ride the vehicle and contact your dealer or visit www.ducatiurbanemobility.com for



integrity and cause damage. Remove any sharp edges caused by misuse, breakage or damage to the item. If any factory
defects, unusual noises or faults are detected, do not ride the vehicle and contact your dealer or visit
www.ducatiurbanemobility.com