There are two ways to charge the device.
►
Charging with computer: connect the device directly to
computer by USB cable included at the packaage to charge.
►
Charging with the charger: plug into an adapter for charging. *
Please use adapter ≤ 1A charging current/≤5 voltage to avoid any
potential damages to this unit.*
* In general, it takes about 2-3 hours before fully charged.
★ Note: • Indicator light flash red when charging and keep on
blue after fully charged.
Video Instruciton Link - https://youtu.be/QGFfVkT5ntQ
Charging
Step 2: Change number after DATE, format must be YY-mm-dd eg:
2021-06-01
Step 3: Change number after Time, format must be HH-mm-ss
eg:11:28:03
Step 4: After finish setting, click “File-Save” to save setting.
15
To Next Page
Loading...