36 184981
DUKE Model 959R Soft Serve Freezer
WINTER STORAGE
To protect the unit during seasonal shut-down, it is important that the freezer be
stored in the proper manner. Use the following procedures.
1. Disconnect all power to the freezer.
2. Disassemble and wash all parts that come in contact with the mix with a warm
mild detergent solution. Rinse in clear water and air dry all parts thoroughly.
3. Store the loose parts, such as the head assembly, beater assembly, and pump
parts in a safe, dry place.
4. Do not lay heavy objects on the plastic or rubber parts.
5. Cover the freezer and all loose parts to protect them from dust or other
elements that could contaminate them while in storage. Place the freezer in a
dry location.
6. On water cooled freezers, disconnect the water supply. Use compressed air to
blow out all remaining water in the condenser.
IMPORTANT:
The water valve must be opened in order to blow out the condenser. Failure
to purge the freezer of water can result in severe damage to the refrigeration
system. Call your service technician for service.
11 Routine Maintenance – continued
USE ONLY ORIGINAL OR AUTHORIZED REPLACEMENT PARTS
WITH THIS FREEZER.
(See your Illustrated Replacement Parts Manual)
Should you have any questions on items that are not included in this maintenance
schedule, or problems where service assistance is needed, please call H. C. Duke &
Son,LLC. Service Department, for factory service assistance.
Phone: (309) 755-4553 or (800) 755-4545
Fax: (309) 755-9858
E-mail: service@hcduke.com
To Next Page
Loading...
Need help?
General
