Duke RBC 48 - User Manual

Other manuals for Duke RBC 48

Questions and Answers

M
Michael StarkAug 12, 2025
How to fix a Duke RBC 48 Refrigerator cabinet that is too warm?
- J
  Joseph SanchezAug 12, 2025
  If your Duke Refrigerator's cabinet is too warm, several factors could be the cause. First, ensure the unit is plugged in. If it is, check the thermostat setting; setting it to a colder setting (higher number) might resolve the issue. Other potential causes include doors not sealing properly (adjust them), torn or damaged door gaskets (replace them), a non-running evaporator or condenser fan motor (check and repair or replace), a dirty condenser coil or filter (clean it), or a refrigerant leak (leak check, repair, and recharge). If the thermostat is faulty, especially if it's not closing in the coldest position, consider replacing it.
P
Pamela BuchananAug 21, 2025
What to do if there is water in the bottom of my Duke Refrigerator?
- M
  Mark WrightAug 21, 2025
  If you find water at the bottom of your Duke Refrigerator, the drain tube might be plugged. Try clearing the drain tube. Also, check if the drain tube is loose or disconnected from the drain pan; if so, tighten or reconnect it.
J
Jennifer WilliamsAug 31, 2025
Why is my Duke RBC 48 cabinet too cold?
- H
  hhutchinsonAug 31, 2025
  If your Duke Refrigerator's cabinet is too cold, the thermostat might be set too cold. Try turning the thermostat to a warmer setting; remember, the higher the number, the colder the unit. Another possibility is a faulty thermostat that's stuck closed, even in the off position. In this case, you should replace the thermostat.