To Next PageTo Next Page
Need help?Do you have a question about the Duluth Forge FVFLC18-1 and is the answer not in the manual?
General| Brand | Duluth Forge |
|---|---|
| Model | FVFLC18-1 |
| Category | Fireplace Accessories |
| Language | English |
Log placement is critical to proper burner performance. Logs must be correctly positioned onto the burner.
Ensure venturi tube airflow is not reduced by dirt or obstructions for proper flame appearance.
Monitor fans near logs. Prevent flame impingement on logs or firebox to avoid sooting.
Avoid scented or decorative candles during operation; they produce soot residue.
Properly installed sets shouldn't deposit soot. Call for service if soot appears.
Raise sunken fireplace floor for adequate airflow and to prevent sooting.
Ensure glass doors are open during operation; use the frame opening for the minimum front opening.
Clean firebox and chimney of creosote before installing gas logs to prevent odors and sooting.
Follow diagrams precisely. Use approved parts only. Do not modify logs. Identify logs by number for installation.
Insert log #1 into slots in the rear log bracket.
Insert log #2 into slots in the middle log bracket.
Insert logs #3 and #4 into slots in the front log bracket.
Place logs #5, #6, #7, and #8 according to the provided illustrations.
Insert log #1 into slots in the rear log bracket.
Insert log #2 into slots in the middle log bracket.
Insert log #3 into slots in the front log bracket.
Place logs #4, #5, #6, and #7 according to the provided illustrations.
List of item numbers, part numbers for FVFLC18-1 and FVFLC18-2, descriptions, and quantity.
