Duluth Forge FVFLC18-1 - Model FVFLC18-2 Log Installation; Step 1: Rear Log Bracket; Step 2: Middle Log Bracket; Step 3: Front Log Bracket

6
www.factorybuysdirect.com
200235-01A
INSTALLING LOGS
MODEL FVFLC18-2
1. Insert log #1 into slots in rear log bracket.
2. Insert log #2 into slots in middle log
bracket.
3. Insert log #3 into slots in front log bracket.
4. Place log #4 on over the left side of logs
#1, #2 and #3.
5. Place log #5 on over the right side of logs
#1, #2 and #3.
6. Place log #6 onto logs #2 and #4 as shown
below.
7. Place log #7 onto logs #3 and #5 as shown
below.
Log #1
Log #5
Log #7
Log #6
Log #2
Log #4
Log #3