Need help?Do you have a question about the Duncan PowerStage 700 and is the answer not in the manual?
Connect PowerStage 700 speaker outputs to 4-16 ohm cabinets using Neutrik combi-jacks.
Connect the unit to power and your guitar or pedals via the input jacks.
Connect to mixers/monitors via XLR and engage the Cabinet Modeling feature.
Ensure the volume control is off before powering on the unit.
General| Weight | 12 lbs (5.4 kg) |
|---|---|
| Dimensions | 14" (35.6 cm) W x 5" (12.7 cm) D x 5.5" (14 cm) H |
| Inputs | 1 x Instrument |
| Type | Solid State |
| Channels | 1 |
| Outputs | 2 x Speaker Output (Speakon) |
| Power Output | 700W |
| Impedance | 4 Ohms |
To Next Page
