Transmission of Analog 7.1 Audio to External
Amplifier (Receiver)
Four analog 2RCA-2RCA cables
shall be used (not included). It
is better to use four identical ca-
bles.
We recommend you to turn
down the volume of your audio
equipment before connection, in
order to protect your hearing from
unexpectedly high volume, and
to eliminate the risk of damage to
your audio system.
Transmission of Analog Audio to External
Stereo Amplifier (or TV Set)
An analog 2RCA-2RCA cable shall be
used (not included).
1. Connect analog stereo audio output (AU-
DIO L/R) of your player to the audio input
of your stereo amplifier.
2. Select a relevant input in your amplifier.
We recommend you to turn down the
volume of your audio equipment before
connection, in order to protect your hear-
ing from unexpectedly high volume, and
to eliminate the risk of damage to your
audio system.
You may send the analog audio signal from your player to the TV set, in case you use
DVI, Component video, or Composite video for video signal transmission and don’t use
an AV receiver for digital audio decoding. In case of connection via HDMI, video and audio
signals will be transmitted using a single HDMI cable, that’s why there is no need of ad-
ditional analog audio connections in this case.
To Next Page
