Need help?Do you have a question about the Dunlop Cry baby Classic and is the answer not in the manual?
Create cool, Shaft-style lines by pumping the pedal in time with the music.
Add a filtered, techno flavor by slowly sweeping the pedal from heel to toe.
Set the pedal at its halfway point for a penetrating, midrange heavy tone.
Connect a 9-volt battery or Dunlop ECB03 AC Adapter.
Connect guitar to pedal and pedal to amplifier.
Push the toe of the pedal down until you feel a click to turn it on.
Remove bottom plate, connect clip, place battery, and replace cover.
Unplug the input jack when the effect is not in use.
General| Type | Wah Pedal |
|---|---|
| Effect Type | Wah |
| Technology | Analog |
| Output Impedance | 10 kOhm |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Supply | 9V battery or DC adapter |
| Controls | Wah |
To Next Page