What to do if my Duolang Air Cleaner does not cool?
If your Duolang Air Cleaner isn't cooling, there might be a few reasons. First, check the water level in the tank to ensure it's sufficient. If the water level is adequate, make sure the unit is in cooling mode by turning the COOLING dial. If neither of these solutions works, the pump may be defective, and you should contact customer service.
Why is my Duolang Air Cleaner not producing enough cooling?
If your Duolang Air Cleaner isn't cooling sufficiently, the cooling pad might not be fully saturated with water. Allow a few minutes for the cooling pads to become completely saturated.
How to fix Duolang Air Cleaner with no airflow?
If your Duolang Air Cleaner has no airflow, the power cord might not be properly plugged in. Check to ensure the plug is securely inserted into an outlet.
What to do if water is coming out of the Duolang Air Cleaner louvers?
If water is coming out of the air louvers of your Duolang Air Cleaner, the cooling pads may be clogged with debris. You can clean the cooling pads by rinsing them in water and allowing them to dry thoroughly. If the problem continues, contact customer service.
Details voltage, current, evaporation capacity, airflow, power, tank capacity, size, and weight for DL-60 E.
Details voltage, current, evaporation capacity, airflow, power, tank capacity, size, and weight for DL-80 E.
Explains how to adjust fan speed using buttons and the display bar on the electronic control panel.
General| Brand | Duolang |
|---|---|
| Model | DL-60 E |
| Category | Air Cleaner |
| Language | English |
To Next Page