DUOTONE UNIT 23 - Attaching the Lazy Pump Clip

To Next Page

To Previous Page

DUOTONE UNIT 23 / UNIT 23 MANUAL

ENGLISH

HANDLING OF THE LAZY PUMP CLIP

7.2. ATTACHING THE LAZY PUMP CLIP

1. Place one half of the Lazy Pump Clip on the valve so that the lower edge of the Lazy Pump Clip

fits into the groove of the valve.

2. Place the second half of the Lazy Pump Clip on the valve so that the snap arms face the corre-

sponding groove.

3. Press the two halves carefully together with the help of a pair of pliers. Both snap arms must be

fully engaged so that the Lazy Pump clip is securely closed.