Duplo DP-A100 II User Manual

2
1. Place the printer unit at the installation site.
2. Remove all the remaining fi xing tapes.
3. Loosen the four screws to attach the support
tray unit. Then tighten the screws.
2. Installation
CAUTION
● Lifting of the printer unit should be
performed by two or more persons,
not by one person alone.
Otherwise, hands could get caught
up or crushed.
● Place the printer unit on a fl at, level
surface.
Screws
Support tray unit

Duplo DP-A100 II Specifications

General

Brand	Duplo
Model	DP-A100 II
Category	Disc Duplicator
Language	English