Duplo DP-A120 II - Ink Pack Installation; Loading and Securing Ink Pack

8
5. Push the
ink pack
in to the
set line
on the
ink pack.
6. Push the
ink pack holder
back.
7. Close the
front cover
.
1. Open the
front cover
.
2. Grasp the
ink pack holder
and pull it down.
3. Remove the
cap
from a new ink pack.
4. Insert the
ink pack
so that the groove on the
lip fi ts onto the
U
groove of the holder.
6. Setting the Ink Pack
Ink pack
Front cover
U
groove of holder
Front cover
Set line
CAUTION
● Do not leave an ink pack uncapped
for longer than necessary.
Ink pack holder
Correct Incorrect
Ink pack holder