MAINTENANCE
CLEANING THE BOILER
To maintain your steam cleaner in good condition and to ensure constant performance, we recommend that you periodically
clean the boiler aer every 50 hours of use or less depending on water hardness.
1. Before cleaning the boiler, make sure that the boiler is at room temperature, that it has not been used
for at least 8 hours, and that the steam cleaner is disconnected from the power source.
2. Turn the steam cleaner over and remove the boiler drain cap using the provided wrench, and empty all the remaining water from the
boiler.
3. Using the provided funnel, refill the boiler with equal parts of water and white vinegar ( for a maximum of 700ml or 23 oz )
and close the boiler cap. Let sit overnight.
4. Drain the boiler, and rinse thoroughly with clean water.
5. Refer to page 08 for instructions on how to refill and turn on the machine.
ATTENTION: It is not recommended that you use any other chemical to clean this product.
Doing so will automatically void the warranty.
O’RINGS
If the attachment connections dry up aer intensive use, put a small amount of
lubricant (Vaseline) around the O-rings on the male attachment.
To Next Page
Loading...
