HOW TO USE YOUR STEAM CLEANER
FILLING WITH WATER
Remove the water tank cap (2) and fill with up 2.44 L (or 0.64 gal) of water.
Use the provided funnel if needed.
PLUGGING IN THE MACHINE
Unravel completely the electrical cord. Connect the electrical cord
to a 15 or 20 amp 110V / 120V power outlet (make sure the circuit
is not already used by another high wattage appliance).
TURNING THE MACHINE ON
Turn the main dial to the
position. At this position the orange SteamReady™
indicator will come on when the unit reaches operating pressure, aer
approximately 8 minutes of heating time.
During use, the orange SteamReady™ indicator will turn on and o.
This is normal, and indicates that steam is being generated in the boiler.
NOTE: The position is used only to exhaust steam. The orange SteamReady™ indicator will not
come on and the steam cleaner will not produce steam when the dial is in the position.
8
To Next Page
Loading...
