DUR-line
®
SF 2450 B - Sainder
Ideal for realigning your satellite system
Rubber protective cover
Extremely compact in size and weight
Simple to use
Background lighng
4 LEDs which display acve signals
from a receiver / TV
Acoustic signal
See the reverse side for instructions
on how to align the antenna
Safety Instrucons
Handling Waste Packaging and Recycling
Service
Product Descripon
Video tutorial (subtitle english):
Please consider the environment when you dispose of any packaging material.
This product consists of recyclable materials. Take an acve part in protecng
the environment by ensuring that your old device
is disposed of in an environmentally friendly manner.
Please take your device to an ocial collecon or
recycling point.
Your local authority or city council will provide you with informaon
about your nearest collecon point.
Dear customer,
Thank you for choosing this high-quality product.
Please do not assume that the device is defective if your product does not
immediately function as you would expect.
Please do not immediately return the device; please send us an email instead!
Support email address: support@durline.de
The SF 2450 B analogue satellite finder with new and improved electronics
enables you to quickly and easily align your satellite system in a precise and
reliable way. Accurate results are provided via both the backlit level display and
an acoustic signal.
This device is very sensitive and can pick up even the weakest signals. Strong
input signals (through powerful satellites or large satellite antennas) can be
easily attenuated using the control dial.
The device can be configured with all types of satellite systems and produces
highly accurate readings.
The satellite finder is powered through the LNB operating voltage by the
receiver/TV or multiswitch and does not require an additional power supply.
• Never open a product that has been connected to an electricity supply
as there is a high risk of electrocuon!
• Never work on satellite equipment during thunderstorms.
• The product must be immediately isolated from the operang voltage if
it comes into contact with uids.
• Do not operate a damaged device.
• The device must be connected and used in accordance with the
user instrucons.
• Non-observance of these instrucons can invalidate your
guarantee.
• This device may only be opened and repaired by qualied personnel
who must observe the applicable instrucons.
Overview
4 4 x LEDs to display the active signal from the receiver / TV
18 V = horizontal band active
13 V = vertical band active
22 kHz = high band active
0 kHz = low band active
5
Level adjuster to adjust the degree
of sensitivity
1 LNB connector
2 Receiver connector / TV
connector (= power supply)
3 Signal-level-display
i
A video tutorial is available to view on YouTube.
Scan the QR code adjacent:
or
enter “DUR-line SF 2450 B” in the search eld in YouTube.
DURA-SAT GmbH & Co.KG
Unterer Dammweg 6/1
78050 Villingen-Schwenningen
WEEE reg. no.
DE 88896400
www.durline.de
Subject to change and prinng errors.
May only be copied and reproduced with
the permission of Dura-Sat GmbH.
Issued 04/18.
Manual available for download
in other languages:
hps://durline.de/qr/100522?manual
NEW
Improved
electronics
developed by
DUR-line
®
1 2
4
5
3
Technical Data
Input level (min.): 68dBµV (-40dBm)
Input level (max.): 98dBµV (-10dBm)
Input frequency: 950 - 2400MHz
Operating voltage: DC 13 - 18V
LED display for 0Hz, 22KHz, 13V, 18V
What’s Included
1 x SF 2450 B - Satfinder
1 x FF cable
1 x quick start guide
To Next Page
Need help?
General
