Ideal for realigning your satellite system
Extremely compact in size and weight
Easy installation and handling
Backlit signal display
Adjustable attenuation setting
Acoustic signal
Power supply via receiver
Scope of delivery
1
4
6
2
1 x SF 2500 Pro Satfinder
1 x FF cable
1 x instructions
Technical data
Input frequency: 950 - 2150 MHz
Input level min.: 68dBµV
Input level max.: 98dBµV
Input impedance: 75 Ohm
Output impedance: 75 Ohm
Power supply: 13 - 18 Volt DC
Disposal
Please consider the environment when you dispose of any packaging material.
This product consists of recyclable materials. Take an acve part in protecng the
environment by ensuring that your old device is disposed of in an environmentally
friendly manner.
Therefore, take your device to an ocial collecon or recycling point.
Your local government or city council will provide you with informaon about such
a collecon point near you.
DURA-SAT GmbH & Co.KG
Unterer Dammweg 6/1
78050 Villingen-Schwenningen
WEEE reg. no.:
DE 88896400
www.durline.de
Subject to changes and prinng errors.
May only be copied and reproduced with
the permission of Dura-Sat GmbH.
Version dated 02/18
Installation instructions
see the reverse side
5
3
3
DUR-line
®
SF 2500 Pro - Sainder
5
1 LNB connector
2 Receiver connector
3 Gradually increase/reduce attenuation
4 Switch background lighting on/off
5 Switching buzzer on and off
6 Infinitely variable attenuator
7 13 V = vertical/18 V = horizontal
8 22 k = high-band/0 Hz = low-band
9 Attenuation stage
-3 dB = brief flash
-6 dB = long flash
-9 dB = continuous
Overview
8 7 9
Safety instrucons
• Never open a product that is connected to an electricity supply as there is a high risk
of electrocuon!
• Never work on the satellite system during thunderstorms.
• The product must be immediately isolated from the operang voltage if it has come into
contact with liquid.
• This device may only be opened and repaired by qualied personnel
who must observe the applicable regulaons.
NEW
Improved
electronics
developed by
DUR-line
®
Video tutorial (subtitle english):
A video tutorial is available to view on YouTube,
you can scan the adjacent QR code.
or
enter “DUR-line SF 2500 Pro” in the search eld in YouTube.
Manual for download in other languages:
www.durline.de/qr/manual/sf2500pro.html
Please read the instructions on the back page CAREFULLY
Please read the instructions on the back page CAREFULLY
Especially note step 1, it is essential!
Especially note step 1, it is essential!
Service
Dear customer,
Thank you for choosing this high-quality product.
Please do not assume that the device is defective if your product does
not immediately function as you would expect.
Please do not immediately return the device; please send us an
email instead!
E-Mail to Support
Review product
Sased? Happy?
We always do our utmost to make sure you are sased!
As such, we are always happy to receive posive feedback.
Share your experiences:
• Review our product
Review now
Product descripon
The SF 2500 Pro microprocessor-controlled satellite finder with new and improved electronics
enables you to quickly and easily align your satellite system in a precise and reliable way. Accurate
results are provided via both the backlit display and an acoustic signal.
This device is very sensitive and can pick up even the weakest signals. Strong input signals
(through powerful satellites or large satellite antennas) can be easily attenuated using the
“Attenuation +/-” buttons and the lateral adjustment wheel. The device can be configured with
all types of satellite systems and produces highly accurate readings.
The satellite finder is powered through the LNB operating voltage by the receiver/TV or
multiswitch and does not require an additional power supply.
The Satfinder must be used near the satellite dish! In the living room or attic the function may
be restricted (cable attenuation).
i
To Next Page
Need help?
General
