DUR-line SF 2500 Pro Quick Start Guide

Ideal for realigning your satellite system
 Extremely compact in size and weight
 Easy installation and handling
 Backlit signal display
 Adjustable attenuation setting
 Acoustic signal
 Power supply via receiver
Scope of delivery
1
4
6
2
1 x SF 2500 Pro Satfinder
1 x FF cable
1 x instructions
Technical data
Input frequency: 950 - 2150 MHz
Input level min.: 68dBµV
Input level max.: 98dBµV
Input impedance: 75 Ohm
Output impedance: 75 Ohm
Power supply: 13 - 18 Volt DC
Disposal
Please consider the environment when you dispose of any packaging material.
This product consists of recyclable materials. Take an acve part in protecng the
environment by ensuring that your old device is disposed of in an environmentally
friendly manner.
Therefore, take your device to an ocial collecon or recycling point.
Your local government or city council will provide you with informaon about such
a collecon point near you.
Service Review product
Dear customer,
Thank you for choosing this
high-quality product.
Please do not assume that
the device is defective if
your product does not
immediately function as
you would expect.
Please do not immediately
return the device; please
send us an email instead!

The SF 2500 Pro microprocessor-controlled satellite finder with new and improved electronics enables
you to quickly and easily align your satellite system in a precise and reliable way. Accurate results are
provided via both the backlit display and an acoustic signal.
This device is very sensitive and can pick up even the weakest signals. Strong input signals (through
powerful satellites or large satellite antennas) can be easily attenuated using the “Attenuation +/-”
buttons and the lateral adjustment wheel. The device can be configured with all types of satellite
systems and produces highly accurate readings.
The satellite finder is powered through the LNB operating voltage by the receiver/TV or multiswitch
and does not require an additional power supply.
DURA-SAT GmbH & Co.KG
Unterer Dammweg 6/1
78050 Villingen-Schwenningen
WEEE reg. no.:
DE 88896400
www.durline.de
Subject to changes and prinng errors.
May only be copied and reproduced with
the permission of Dura-Sat GmbH.
Version dated 02/18
Installation instructions
see the reverse side

5
33
DUR-line
®

5
1 LNB connector
2 Receiver connector
3 Gradually increase/reduce attenuation
4 Switch background lighting on/off
5 Switching buzzer on and off
6 Infinitely variable attenuator
7 13 V = vertical/18 V = horizontal
8 22 k = high-band/0 Hz = low-band
9 Attenuation stage
-3 dB = brief flash
-6 dB = long flash
-9 dB = continuous
Overview
8 7 9

• Never open a product that has been connected to an electricity supply as there is a high risk
of electrocuon!
• Never work on the satellite system during thunderstorms.
• The product must be immediately isolated from the operang voltage if it has come into
contact with liquid.
• This device may only be opened and repaired by qualied personnel
who must observe the applicable regulaons.
NEW
Improved
electronics
developed by
DUR-line
®
Video tutorial (subtitle english):
A video tutorial is available to view on YouTube,
you can scan the adjacent QR code.
or
enter “DUR-line SF 2500 Pro” in the search eld in YouTube.
Manual available to download
in other languages:
www.durline.de/qr/manual/sf2500pro.html
Email to Support
Happy?
Review now
Instructions
see the reverse side

We always do our utmost to make sure

As such, we are always
happy to receive posive
feedback.
Share your experiences:
• Review our product
• Rate our product

DUR-line SF 2500 Pro Specifications

General

Brand	DUR-line
Model	SF 2500 Pro
Category	Camera Accessories
Language	English