EasyManua.ls Logo

Dura Trel 11190 Elmwood Trellis User Manual

Dura Trel 11190 Elmwood Trellis
5 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
#11190 Elmwood TRELLIS
ASSEMBLY INSTRUCTIONS
TOOLS NEEDED
Drill with #2 Phillips drill bit or
Phillips Screwdriver
Super or Crazy Glue
Hammer or Mallet
TRELLIS ASSEMBLY
(Refer to Drawing 1)
On clean flat surface lay the 2 x 2 x 74” left post with the routed holes are facing up and the screw
pilot holes are facing you. Insert one of the x 1½ x 22” top/bottom rails into the bottom routed
hole, then continue to insert nine ¼ x 1½ x 22 slats into the middle slots. Set the 2 x 2 x 74”
right post on top of the previous assembly and insert each rail into the routed holes. Lay trellis flat,
starting at the top right of the trellis, take one ¼ x 1½ x 66” slat and weave it above, then below
each of the ¼ x 1½ x 22” slats, insert into right slot of the bottom rail. Weave left
¼ x 1½ x 66” slat in the opposite direction of the right slat, and insert into the left slot in the
bottom rail. Spread the top of the panel just enough to insert the second x 1½ x 22”
top/bottom rail, inserting the free end of the slats into the into the top/bottom rail. Make sure all
parts are inserted completely into both posts and fasten with screws. Snap screw caps over screw
heads. Finally, apply household glue to the corners of each
2 x 2” post cap and place on top of each post. Trellis is now ready for installation (See Ground
Anchor Hardware Bag).
If you encounter missing or defective parts, please contact manufacturer direct at
toll free # below.
Dura-Trel, Inc. ~ PO Box 122, Sheboygan Falls, WI 53085 ~ Toll Free 877-258-6020
Question and Answer IconNeed help?

Do you have a question about the Dura Trel 11190 Elmwood Trellis and is the answer not in the manual?

Dura Trel 11190 Elmwood Trellis Specifications

General IconGeneral
BrandDura Trel
Model11190 Elmwood Trellis
CategoryLawn and Garden Equipment
LanguageEnglish

Summary

Elmwood Trellis Assembly

Tools Required for Assembly

Lists all necessary tools for the successful assembly of the Elmwood Trellis.

Trellis Assembly Instructions

Step-by-step guide for assembling the Elmwood Trellis, including part placement and fastening.

Elmwood Trellis Packing List

Included Parts Inventory

Comprehensive list of all components included in the trellis package for user verification.

Hardware Bag Contents

Detailed enumeration of items contained within the hardware bag for the trellis.

Ground Anchor Installation Guide

Ground Anchor Parts List

Specifies the parts required for the installation of the ground anchors.

Installation Methods

Outlines three options for installing ground anchors based on soil type and permanence.

Dura-Trel Product Warranty

Warranty Coverage Details

Information on what manufacturing defects are covered by the 20-year warranty.

Exclusions from Warranty

Details conditions and events that are not covered by the product warranty.

Warranty Claim Procedure

Instructions on how to submit a warranty claim and the expected remedies.

Related product manuals