Model#
11179
Assembly Instructions
Part # Description
max 5 x 3.5
1
2 2" sq. x 84" Right Post
3 ⅞ x 1½ x 27½" Outer Cross Rail
4 ⅞ x 1½ x 27½" Inner Cross Rail
5 ⅞ x 1½ x 27½" Middle Cross Rail
6 1 x 1 x 26½" Vertical Rail
7 1 x 1 x 16¾" Vertical Rail
8 1 x 1 x 13" Vertical Rail
9 1½ x 4 x 72" Arbor Top Rail
10 ⅞ x 1½ x 41" Arbor Top Cross Rail
11 ⅞ x 1½ x 18" Corner Brace
12 5 ⅜" Arbor Top End Cap
13 Hardware Bag
(includes:)
2" sq." Post Cap
PLEASE READ THROUGH BEFORE BEGINNING ASSEMBLY. ⅞ x 1½" End Cap
IMPORTANT: Check boxes for Contents Listed
1¼" Painted Screw
Check inside of parts as some parts are packaged
¾" Painted Screw
inside of others
Super Glue Tube
14
Arbor Ground Anchor Kit (includes:)
In the event of missing, damaged or defective parts
16" Steel Ground Anchor (L-Shaped)
please call our customer service dept. at 1-877-258-6020
#8 - 1" Painted Self Tapping Screw
When assembling components, place on a clean, flat
non-abrasive surface to avoid scratches
…
Battery or Electric Drill with #2 phillips bit
Hammer or Rubber Mallet (recommended)
150 Birch Road
P.O. Box 122
Sheboygan Falls, WI 53085
To Next Page
Need help?
General