Durablow RR12 - User Manual

Version 20190806 Page
1
INSTALLATION & OPERATING INSTRUCTIONS
( Model: TR2003, TR2004 ; Transmitter: T1003, T1004 + Receiver: RR12)
IF YOU CAN NOT READ OR UNDERSTAND THESE INSTALLATION INSTRUCTIONS, DO NOT ATTEMPT TO INSTALL OR OPERATE.
INTRODUCTION
This Durablow remote control system is to provide a safe and reliable control for gas heating appliances, such as fire
fireplace. The system can be operated thermostatically or manually from the transmitter (remote handset). The system
operates on radio frequencies (RF) within a 20-foot range and non-directional signals. The remote receiver box code
must be matched to the transmitter prior to initial use (see LEARNING TRANSMITTER TO RECEIVER).
Read ALL sections and original manufacturer manual for safety installation before any action. These safety features shut
down the system and appliance, such as fireplace when a potentially unsafe condition exists, such as high-heat.
PACKING LIST:
Please check and make sure all parts are in good condition before installation. Any questions, please do NOT return to
dealer, but email us (info@payandpack.com) and contact us on PayandPack.com immediately, we will provide solutions
shortly. Thank you.
1. Remote transmitter T1003 or T1004 (1),
2. Remote control receiver box RR12 with two signal wires (1),
3. USB power cord + adapter (1),
4. Wall mount cover plate (1), Switch box screw (2), Slide switch button (1)
5. Installation Instructions (1)
Fig. 1 Transmitter Handset
Fig. 2 LCD display on transmitter

Summary

Durablow Remote Control Installation and Operation

Receiver Box Operation and Safety

Receiver Box Mode Selection

Critical Installation Safety Precautions

Lists essential safety precautions, prohibitions, and wiring guidelines for system installation.

Wiring the Remote Control System

Millivolt Valve Wiring Diagram

Details how to connect the receiver box to a millivolt gas valve using TH & TH/TP terminals.

Electronic Ignition Wiring Diagram

Instructions for wiring the receiver box to an electronic spark ignition module using a 24VAC transformer.

System Operational Testing

Testing Millivolt Valve Systems

Provides a checklist to verify correct operation of the system with millivolt valves.

Testing Electronic Ignition Systems

Outlines tests to ensure the proper functioning of the system with electronic ignition systems.

Advanced System Features

Receiver Box Thermal Safety

Explains the thermistor safety feature that shuts down the system if the receiver box overheats.

Setting the Desired Room Temperature

Timer and Child Safety Lock

Programming the Countdown Timer

Details how to program the countdown timer on the transmitter for automatic shut-off.

Durablow RR12 Specifications

General

Brand	Durablow
Model	RR12
Category	Transmitter
Language	English