1
INTRODUCTION
SPECIFICATIONS
• Wingspan: 1300mm (51")
• Length: 920mm (36.25")
• Wing Area: 26dm2
• Flying Weight: 1150g
• Number of Channels: 6 (throttle, ailerons, elevator,
rudder, flaps, reverse (RVS))
•
Motor: 3636-900KV brushless outrunner
• ESC: Aerostar G2 40amp Brushless ESC w/reverse
• Servos: 6 x 9g
• Prop: Durafly nylon reinforced 11.5 x 5
• Battery Suggestions: 1800-2200mAh, 4S, 20-40C
Thank you for purchasing the Durafly Tundra V3. After the incredible success of the Tundra V1 and
V2, Durafly has decided to produce yet another version with even more improvements to bring this
model bang up to date. The V3 is now a pure 4S set-up so it has power in abundance to make your
flying even more fun than it was before (if that is at all possible!). Other changes/ improvements are
daylight bright LEDs (so bright they are suitable for dawn to dusk flying), a reinforced nylon prop
that is more efficient, and better balanced, a return to the classic EPO foam wheels which are
lighter, and stronger, and hex-head bolts and screws throughout. The V3 is available in a "Classic"
green color scheme, and also a new red and silver scheme Durafly has called the "Inspire". The
reason being is that the original Tundra was "Inspired" by the "Highlander" full-size SuperStol
experimental airplane.
So if you are looking for flying with no limits then you’ve found it with the Tundra V3. Whether it’s
flying from rough bush fields, water, snow, or sand, FPV flying, aerobatics, glider towing, candy
dropping, or just good old fashioned super STOL slow flying, then the Tundra V3 takes it all on with
ease. Its lightweight yet rugged construction, powerful brushless set-up, and perfectly harmonized
design give you an instant feeling of confidence on the sticks as quickly as it puts a smile on your
face.
The Tundra V3 also includes the revolutionary Aerostar RVS (reverse function system) G2 ESC, this
ESC offers instantaneous reversing, so there is now no need to stop the prop before reversing. This
makes it perfect when using the Tundra V3 on the water as a floatplane, but it is also great fun in the
air, and really good for short landings, just ensure the prop is on nice and tight!!
Simply put, the Tundra V3 is even more fun to fly than previous versions, and you will be flying even
quicker as there is now even less assembly on the V3. With either the included floats, tow mounting
point, and FPV canopy, or with the optional skis and candy dropper, the choice is yours regarding
how you put your Tundra V3 to work.
To Next Page
Loading...
