Why does my DURASTAR DRA1U30S1A change to FAN mode?
If your DURASTAR Heat Pump switches from COOL/HEAT to FAN mode, it could be for two reasons. First, the unit might be preventing frost from forming. In this case, wait for the temperature to rise, and it will go back to the previous mode. Second, the set temperature might have been reached, causing the compressor to turn off. If needed, adjust the set temperature.
How to eliminate bad odor from DURASTAR Heat Pump?
If your DURASTAR Heat Pump emits a bad odor, it could be due to absorbed odors from the environment, such as furniture, cooking, or cigarettes. Clean the unit to remove these accumulated odors. Alternatively, the filters might be moldy, so clean or replace them.
Why is my DURASTAR Heat Pump emitting dust?
If you see dust coming from your DURASTAR Heat Pump, it's likely that the unit accumulated dust during a period of non-use. This dust is then emitted when the unit is turned on. To prevent this, cover the unit during long periods of inactivity.
Why does my DURASTAR Heat Pump indoor unit emit white mist?
If you notice white mist coming from the indoor unit of your DURASTAR Heat Pump, it's likely due to a large temperature difference between the room's air and the conditioned air, especially in humid regions. This is a normal occurrence due to humidity.
Why DURASTAR Heat Pump emits white mist from both units?
If both the indoor and outdoor units of your DURASTAR Heat Pump are emitting white mist, it's likely happening when the unit restarts in HEAT mode after defrosting. The mist is due to moisture generated during the defrosting process, which is normal.
To Next Page
General