8
- In order to provide our customers with quality, reliability and versatility, this product has been
made to strict production standards. This manual includes all the necessary information about
installation, debugging, discharging and maintenance. Please read this manual carefully before
you open or maintain the unit. The manufacturer of this product will not be held responsible if
someone is injured or the unit is damaged, as a result of improper installation, debugging, or
unnecessary maintenance. It is vital that the instructions within this manual are adhered to at all
times. The unit must be installed by qualied personnel.
2. Preface
Please read these instructions carefully before using the heat pump and keep them for future
reference:
1. Always keep the unit upright. If the unit has been tilted or put on its side, wait 24h before
starting the heat pump.
2. Put the unit on a at, solid base. Tilting the heat pump for max 3° is accepted.
3. Do not drop the heat pump.
4. The heat pump must always be installed outdoors.
5. Check if the voltage indicated on the heat pump corresponds to the local mains voltage before
you connect the unit. Please nd more information about the electrical connection in section 3.5
6. Do not pull any electrical cable, sensor or tubing with unnecessary force.
7. Do not wrap any cable around the heat pump.
8. Do not use the heat pump in combination with a transformer.
9. If the heat pump is damaged during transportation, it must be replaced, please contact your
service centre or similarly qualied persons in order to avoid a hazard.
10. Always make sure the water connections of the heat pump are properly locked before you
start using the machine.
11. Make sure the ow sensor is installed properly after maintenance.
12. Use supply wires suitable for 75°C.
13. The evaporator ns must not be damaged.
The heat pump will always perform very well, provided the following elements are present
1. Fresh air 2. Electricity 3. Swimming pool water
To Next Page