Duratrax Onyx 200 User Manual

®
™
It is strongly recommended to completely read this manual before use! Damage resulting from misuse
or modifi cation will void your warranty.
INDEX
SPECIFICATIONS
AC input: 110V AC 60Hz
DC input: 11 to 15V DC, built-in lead with alligator clips
Battery types: 4 to 7 NiCd or NiMH (4.8 to 8.4V)
Battery capacity range: 750 to 7500mAh
Fast charge current: 1.5A, 3A, 5A linear (40W)
Fast charge termination: peak detection
Fast charge safety timer: 90 minutes
Peak sensitivity: 8mV
Auto-trickle current: 1/20 fast chg setting
Input control: pushbutton, slide switch
Display type: 5 LEDs (four red, one green)
Audible tones: indicate start, stop, errors
*Output connections: built-in lead with standard connector, built-in jack for charging 4 or 5 cell Rx packs
Protective devices: solid-state reverse polarity and current overload
Case size: 5.74" x 4.60" x 1.61" [146 x 117 x 41mm]
Weight: 17.0 oz. [484g]
* Adapter - Standard to Deans
®
Ultra
®
male available separately (GPMM3131)
* Adapter - Standard to Vendetta, MiniQuake, RS4 Battery available separately (DTXC2210)
SPECIFICATIONS ..........................................................1
SPECIAL FEATURES ..................................................... 2
IMPORTANT PRECAUTIONS ........................................2
GLOSSARY OF TERMS................................................. 2
INPUT POWER .............................................................. 3
CONTROLS & CONNECTIONS ..................................... 3
DETERMING BATTERY TYPE & SPECIFICATIONS ..... 4
GETTING STARTED ...................................................... 4
STARTING CHARGE...................................................... 4
TRICKLE CHARGE ........................................................ 5
RESETTING THE CHARGER ........................................ 5
CARE & HANDLING OF NiMH BATTERIES .................. 5
ERROR INDICATORS & TROUBLESHOOTING GUIDE .....6
5-YEAR LIMITED WARRANTY – U.S.A. & CANADA ONLY .......6
The DuraTrax
®
Onyx
™
200 charger is great for a wide variety
of applications! Charge current options of 1.5A, 3A, and
5 amps plus 4 to 7 cell NiCd or NiMH compatibility makes
it great for batteries for 1/18th to 1/8th scale electrics, even
nitro receiver packs. A tiny built-in AC power supply plus
DC input capability is perfect for use at home or at the
track. A unique jack is built-in which is handy for charging
4 to 5 cell nitro Rx batteries.

Duratrax Onyx 200 Specifications

General

Brand	Duratrax
Model	Onyx 200
Category	Battery Charger
Language	English