To Next Page
S
smelendezAug 11, 2025
How to start a DUROMAX Water Pump engine that won't start?
- Eerika07Aug 11, 2025
If your DUROMAX Water Pump engine won't start, first ensure the engine switch and fuel valve are set to “ON”. Check if the choke is closed. Make sure the fuel tank isn't empty and the fuel isn't old or contaminated; if it is, add fresh fuel. Inspect the spark plug; clean it if dirty, or replace it if broken. Confirm the engine is on a level surface. Finally, check the oil level and add or change the oil if needed.
General
