In cases when the pump is used to suck up seawater, be sure to
flush it with fresh water immediately after use to minimize corrosion
and remove deposits.
g
Always use the original parts and relevant tools supplied with the
machine to carry out maintenance. Failure to do this may cause
damage to the pump.
NOTE:
Ł
Inspection and maintenance should take place more frequently
if the pump is used in a dirty environment.
ł
Leave the following inspection and maintenance jobs to the
authorized dealers unless you, the user, have the relevant tools and
necessary DIY skills. In the latter case, refer to service manual.
Table of Maintenance Schedules
Replace per every two years
To Next Page
Loading...
