Duronic DM653 User Manual

11
0-5kgs/0-11lbs
Load
15” - 27” 75x75, 100x100
VESA
-90°/+85°
Tilt
180°
Swivel
Rotate
360°
Ｍａｘ ｗｅｉｇｈｔ １１ ｌｂｓ－５ｋｇ
ＣＡＵＴＩＯＮ： ＤＯ ＮＯＴ ＥＸＣＥＥＤ
ＭＡＸＩＭＵＭ ＬＩＳＴＥＤ Ｗ ＥＩＧＨＴ
ＣＡＰＡＣＩＴＹ．ＳＥＲＩＯＵＳ ＩＮＪＵＲＹ
ＯＲ ＰＲＯＰＥＲＴＹ ＤＡＭＡＧＥ ＭＡＹ
ＯＣＣＵＲ！
Note:This product will need tension adjustments once installation is complete,Make sure all
equipment is properly installed on the product before attempting tension adjustments.
Any time equipment is added or removed from this product,resulting in a change in the weight
of the mounted load,you should repeat these adjustment steps to ensure safe and optimum
operation.Adjustments should move smoothly and easily through the full range of motion and
stay where you set it.If adjustments are dicult and do not stay in the desired position,follow
the instructions to loosen or tighten the tension to create a smooth,easy adjustment motion.
Nota:Una vez instalado,este producto necesita ajustes de tensión.Antes de realizar los ajustes de
tensión,cerciórese de que todo el equipo está bien instalado en el producto.Cada vez que se ag-
regue o quite equipo de este producto y cambie el peso de la carga montada,deberá repetir estos
ajustes para garantizar un funcionamiento seguro
-
-
-
-
EN-INSTRUCTION MANUAL
ES-MANUAL DE INSTRUCCIONES
FR-MANUEL D’INSTRUCTIONS
DE-BENUTZERHANDBUCH
IT -MANUALE DI ISTRUZIONI
DM653
Product A Product B
OR

Duronic DM653 Specifications

General

Brand	Duronic
Model	DM653
Category	Racks & Stands
Language	English

Summary

General Setup and Safety Precautions

Tension Adjustment Instructions

Guidance on adjusting product tension for smooth, safe, and optimal operation after installation.

Installation Warnings and Disclaimer

Critical safety information; failure to follow may cause injury, damage, or void warranty.

Correct Monitor Positioning

Visual guide showing correct vs. incorrect monitor placement to ensure proper function.

Product Specifications and Required Tools

Product A and B Movement Capabilities

Diagrams illustrating movement range, dimensions, and load capacity for products.

Tools Needed for Assembly

Lists tools required for installation that are not included with the product.

Installing Product B

Product B Step 1: Arm Screw Removal

Instruction to remove the screw from the middle spring arm of Product B.

Product B Step 2: Clamp Attachment

Guidance on attaching the clamp mechanism for Product B to the desk.

Installing Product A

Product A Step 1: Clamp Installation

Instructions for attaching the clamp mechanism for Product A.

Product A Step 2: Desktop Strength Warning

Warning to ensure the desktop can support the maximum product weight.

General Connection and Adjustment Steps

Decorative Cap Screw Insertion

Steps for inserting screws into decorative caps on extension arms.

Monitor Mounting with Screw Options

Guidance on connecting monitors using different screw sizes.