11
CAUTION:
do not immerse any part of the vacuum main unit in water or any other
liquid.
Emptying the Dust Container
1. Press down on the Dust Container Release Button(9).
2. Pull out the Dust Container(10) and empty it into a bin.
3. Re-attach the dust container back into the main unit.
Cleaning or Changing the Filter
Cleaning and changing the lter will improve the performance of the vacuum
cleaner. In order to do so, please refer to the following steps:
1. Remove the dust container and the Filter(12). Gently tap out any dust from
the lter into a bin.
2. Wash the lter under running water from the tap, then let it air dry.
3. Once it is fully dry, replace the lter back into the dust container.
Note: Do not use a washing machine to clean the dust lter, or a hair dryer to dry
the lter.
No Cleaning the Whole Vacuum
If the body of the main unit or handle needs to be cleaned, use a damp well-
wrung cloth to wipe over the surface. Then use a dry cloth to dry the surface.
Cleaning and Maintenance
To Next Page
Loading...
