EasyManua.ls Logo

Durr Dental CAS 1 User Manual

Durr Dental CAS 1
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
EN
CAS 1 / CA 1 / CA 2 Basic Unit
Installation and operating instructions
9000-606-26/30
*9000-606-26/30*
2103V005

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Durr Dental CAS 1 and is the answer not in the manual?

Durr Dental CAS 1 Specifications

General IconGeneral
BrandDurr Dental
ModelCAS 1
CategoryMedical Equipment
LanguageEnglish

Summary

Safety and General Information

1.1 Warnings and Symbols

Explains the meaning of warning symbols used in the manual.

2.3 Improper Use

Details incorrect usage scenarios and associated liabilities.

2.5 General Safety Information

Provides essential safety guidelines for unit operation and handling.

2.8 Electrical Safety

Outlines precautions for electrical safety during unit operation and maintenance.

Product Details and Technical Specifications

3.2 Accessories

Lists required and optional items for unit operation and installation.

4.1 CAS 1 Combi-Separator

Provides detailed technical specifications for the CAS 1 Combi-Separator.

4.3 CA 2 Basic Unit

Presents technical specifications for the CA 2 basic unit.

4.4 Information about the EMC

Details electromagnetic compatibility (EMC) emission and immunity measurements.

Unit Operation, Assembly, and Commissioning

5.1 Operation

Explains the general operational principles for CAS 1 and CA 1/CA 2 units.

6.1 Installation/Setup Room

Details requirements for the room where the unit will be installed.

8.2 Installation of the CAS 1 in Treatment Units

Provides instructions for installing the CAS 1 unit within dental treatment units.

8.8 Network Connection

Explains how to connect the unit to a network for monitoring and control.

9.1 Monitoring the Unit via the Network

Outlines the steps and requirements for monitoring the unit through a network connection.

Maintenance, Service, and Troubleshooting

10 Service Program

Provides access to diagnostic and testing functions for the unit.

12.3 Amalgam Collector Vessel is 100% Full

Describes the state when the amalgam collector vessel is full and requires replacement.

13.1 After Every Treatment

Details the cleaning procedure to be performed after each treatment session.

15 Maintenance

Outlines the regular maintenance tasks required for the unit.

16 Tips for Operators and Service Technicians

Offers guidance for troubleshooting common issues and performing maintenance.

Related product manuals