78 0678106030L02 1411V002
Mounting
9 Maintenance
CAUTION
Burns from hot external surfaces
The surfaces of the unit become hot during operation
• Allow surfaces to cool down before operating or maintenance work�
De-energise the unit prior to working on it or in the event of potential hazards (e�g� pull the
mains plug) and prevent it from being switched back on again�
9.1 Maintenance plan
Maintenance interval Maintenance work
Monthly • Clean the surface of the device with a a lint-free cloth� Keep the ventila-
tion openings of the crankcase chamber and cylinder head free from
dust and dirt�
Yearly • Change air intake filter - every six months if dust concentration is high
(see "Change the intake filter")�
Every 4 years • Change vibration dampers - for mobile application, every 2 years
EN
To Next Page
Loading...