What to do if the Dustcontrol DC 1800 motor stops immediately after starting?
If the motor of your Dustcontrol Vacuum Cleaner stops directly after starting, the cause may be an incorrect fuse. Try changing to the correct circuit.
General| Brand | Dustcontrol |
|---|---|
| Model | DC 1800 |
| Category | Vacuum Cleaner |
| Language | English |
Follow basic precautions to reduce risk of fire, electric shock, and personal injury.
Avoid hot particles, explosives, wet areas, flammable gases; use indoors and do not abuse cord.
Disconnect power for maintenance, keep clean, check hoses/gaskets, and ensure machine is undamaged.
Use approved accessories, supervise children, intended for commercial use only.
Step-by-step guide for cleaning the filter using the machine's pulse function.
Instructions for changing fine and HEPA filters, including precautions and pictorial guides.
To Next Page
