DV8 Inner Fender User Manual (English)

To Next Page

Inner Fender

Install Instrucons

Est. install me - Approx. less than 1 hour — Diculty level: EASY

Patent Pending

HARDWARE KIT:

A- Front liner arms w/ (long) screws x 2ea.

B– Front liner screws (medium length) x 4

C– Light Controller Receiver Module

Tools Needed:

1 - 7/64th Allen Key for screws

2– 3/8” wrench or socket & ratchet

3-drill with 7/32nds drill bit (rears only)

4-Punch or scribe to mark for drilling (rears only)

*Special Note: You will need to save and re-use the 8 factory 10mm bolts that held the factory liners in the front.

Need help?

Do you have a question about the DV8 Inner Fender and is the answer not in the manual?

DV8 Inner Fender Specifications

General

Lists required components and tools for the inner fender installation.

Instructions for disassembling the original fender liner assembly.

Details on installing the new inner fender parts and securing them.

Guides the connection of LED lights and the control module.

Provides additional advice and customization suggestions for the installation.