INSTALLATION MANUAL
855-680-9595
NEED HELP?
Remove the trim piece behind the compart-
ment for the factory jack by pulling up on it.
Use a trim piece removal tool if necessary.
Run the wire down the sidewall and along
the bottom of the interior.
Partially remove the trim piece to the
passenger wall of the trunk closest to the
tailgate by pulling up on the bottom and out
on the sides. Use a trim piece removal tool if
necessary.
Feed the wire through the vent in the
tailgate while reaching inside the tailgate
and feeding out of either of the “accessory
ready” holes. You may choose to secure the
wire to the existing wiring loom with zip ties
for a cleaner feel.
STEP 27
STEP 26
STEP 25
To Next Page
Loading...
