Do you have a question about the DVP LB.25 and is the answer not in the manual?
Instructions for checking packaging for damage and verifying pump function if damaged.
Details the process for filling the oil tank, emphasizing using only DVP oil and not exceeding the maximum level.
Specifies that electrical connections must be done by qualified personnel, following regulations and motor plate data.
Advises on checking outlet obstruction, high operating temperatures, and proper r.p.m. attainment, with warnings about prolonged operation.
Emphasizes following instructions carefully for operator and pump safety, and disconnecting power before work.
Provides step-by-step instructions for changing the pump oil, including draining and refilling procedures.
| Power | 0.25 HP |
|---|---|
| Inlet Size | 1 inch |
| Outlet Size | 1 inch |
| Voltage | 220 V |
| Frequency | 50 Hz |
Loading...