8
English
by non-compliance with operation recommendations,
too abrupt apply of the workpiece to the grinding disc,
etc. In order to minimize the risk of recoil always follow
the recommendations during operation of the power
tool.
• During operation of the power tool stay straight and
hold the workpiece with both hands on the supporting
plate.
• Keep your hands safely distant from the rotating
grinding discs and never touch them, otherwise it may
result in severe injuries.
• When processing small blanks, use clamping
devices.
• During operation watch the position of a power cable
(it should always be positioned behind the power tool).
Do not allow it to whip around your legs or arms.
• Dust generated during operation may be a hazard
to your health, inammable or explosive; clean your
working place in time and use means of individual
protection.
• Operation may produce sparks and small metal
particles, which can cause injury to the operator or
to the bystanders. Always wear means of individual
protection (goggles and protective mask), as well as
arrange your working place in a proper way.
• Do not work materials containing asbestos.
Asbestos is considered carcinogenic.
• If the power supply suddenly cuts during operation,
immediately move on / off switch into off in order to
prevent accidental starting of the power tool.
• Avoid overheating your power tool, when using it for
a long time.
After nishing operation
• After turning of the power tool off, the grinding disc
continues to rotate for some time due to inertia. This is
why the power tool should be put aside only after its
rotating parts come to a full stop.
• It is strongly prohibited to slow down the rotation of
slowing grinding discs by applying force to the side
surface of discs.
Symbols used in
the manual
Following symbols are used in the operation manual,
please remember their meanings. Correct interpretation
of the symbols will allow correct and safe use of the
power tool.
Symbol Meaning
Serial number sticker:
DS ... - model;
XX - date of manufacture;
XXXXXXX - serial number.
Read all safety regulations
and instructions.
Wear safety goggles and ear
protectors.
Symbol Meaning
Wear a dust mask.
Wear protective gloves.
Disconnect the power tool
from the mains before instal-
lation or adjustment.
Movement direction.
Rotation direction.
Locked.
Unlocked.
Prohibited.
I
Protection class.
Attention. Warning of possi-
ble user health damage.
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards.
Attention. Important.
"On" position of the power
tool's on / off switch.
"Off" position of the power
tool's on / off switch.
Useful information.
To Next Page
Loading...