9
English
• all persons present on site should wear protective
clothes made of thick fabric and special anti-
dust masks (designed for protection against the
hazardous impact of a specic substance);
• the workplace should be well ventilated and dust
containers as well as dust removal devices (special
vacuum cleaners) must be used;
• cleaning of the workplace after work should be
performed by persons equipped with the aforesaid
personal protection means.
Symbols used in
the manual
Following symbols are used in the operation manual,
please remember their meanings. Correct interpretation
of the symbols will allow correct and safe use of the
power tool.
Symbol Meaning
Rotary sander
Sections marked gray - soft
grip (with insulated surface)
Serial number sticker:
EX ... - model;
XX - date of manufacture;
XXXXXXX - serial number.
Hook-and-loop accessories
fastening.
Read all safety regulations
and instructions.
Wear safety goggles and ear
protectors.
Wear a dust mask.
Disconnect the power tool
from the mains before instal-
lation or adjustment.
Movement direction.
Rotation direction.
Symbol Meaning
Locked.
Unlocked.
Prohibited.
Double insulation / protec-
tion class.
Attention. Warning of possi-
ble user health damage.
A sign certifying that the
product complies with es-
sential requirements of the
EU directives and harmo-
nized EU standards.
Attention. Important.
Useful information.
During operation, remove
the accumulated dust.
Do not dispose of the power
tool in a domestic waste
container.
DWT
power tool designation
Rotary sander is designed for the dry sanding of
different materials and surfaces.
[EX03-125 DV]
This model allows to polish by using special polishing
accessories and polishing substances.
1
Power tool
components
Auxiliary handle
2 Wing nut
3 Ventilation slots
4 On / off switch
5 Port for dust removal
6 Sanding plate (velcro-type)
7 Sanding sheet (velcro-type) *
8 Dust bag (assembly) *
To Next Page
Loading...
