©2018 AS Americas, Inc. 1
AT200® LS SPALET®
Questions and Answers
Warranty What is the warranty?
There is a three year warranty on all parts of the SpaLet for residential applications and a two year warranty
on parts for commercial applications.
Installation Is a professional plumber required for installation?
The SpaLet toilet can be installed but professional installation is recommended especially if this is your first
toilet install. The installation is similar to a regular toilet but uses a drain socket and a gasket dierent from
a traditional wax ring. We have designed this for an easier installation but it depends on your technical
expertise and comfort level.
What type of power is needed?
AC120V GFCI outlet. The seat consumes 1300W +/- 10%
What type of water pressure is needed?
Minimum water pressure: 0.1 MPa (1.0 bar): 14.5 psi Flow pressure
Maximum water pressure: 0.75 MPa (7.5 bar): 109 psi Hydrostatic pressure
What is the heater capacity?
48W
What is the warm air heater capacity?
500W
What is the air volume?
0.3 m3 /min
How much electricity does this SpaLet toilet consume?
The AT200 LS has a rated power consumption of 850 W (environment 20°C/68°F, water 15°C/59°F)
Do you need to buy anything else for installation?
Items needed for installation include standard household tools, drill and bits, caulking and tape
Components What comes with the product?
The following parts are included in the product:
SpaLet Toilet:
•Bidetseatandwatersupplyhose
•Watershutovalveandclip
•Remotecontrol
•Screws,anchors,andAAbatteries(forremotecontrol)
•Anti-theftnut,screw,andwasher(forremotecontrol)
•Waterdrainsocket
•Securingmember
•Screw,washer,anchor,screwwithcap
•Papertemplate
•Installationsupportbase
•Frontsecuringmember/adhesivematerial
•Manualset
•Wallprotectioncover
Is the remote included in the product?
The remote and batteries are included with the purchase of the AT200 LS SpaLet.
(Continued on next page)
To Next Page
General
