Dymo File - To Set Up Your Printer and Scanner; Scanning Your First Document; To Scan Your First Document

3
To set up your printer and scanner
1 Follow the onscreen instructions to set up your printer and scanner, and test
your configuration.
2 At the end of the Wizard, watch the one minute Getting Started video.
4. Scanning Your First Document
Follow the steps in this section to scan your first document. You can also view the
Getting Started video or read the Getting Started section in the Online Help.
To scan your first document
1 Select a folder to file your document under Filing Location.
2 Enter the document name in the File name field under Document
Information.
3 Select one of the following under Reservation:
• Label to print a barcode label on your LabelWriter printer.
• Cover sheet to print a cover sheet with a barcode on your regular printer.
4 Click Create Reservation. A barcode label or cover sheet is printed and a
document reservation file is created in the folder you selected.
5 Attach the barcode label to your document or place the cover sheet on top
of your document.
6 Scan the document on your scanner.
After a few moments, the document reservation file is replaced with your
scanned document.