English
Follow these steps to install and configure the DYMO File software.
1 Download and install the software.
2 Activate the software.
3 Set up your printer and scanner.
4 Scan your first document.
NOTE If you have a version of OMEGA File installed on your computer, uninstall
OMEGA File prior to installing DYMO File.
1. Installing the Software
NOTE To print barcode labels on a label printer, you must have DYMO Label Software
and a LabelWriter printer installed before installing DYMO File software.
To install the software
1 Click the link to download the DYMO File Installer.
2 Click Save to save the installation file to your computer.
3 Double-click DYMO_File_setup.exe.
4 Follow the onscreen instructions.
Quick Start Guide
To Next Page
Need help?
General
