Dolby Atmos
®
Dolby Atmos
®
is a powerful audio technology that allows you to experience
multi-dimensional sound with incredible clarity that envelops you in an
immersive soundscape.
To access the utility, click Start -> All apps -> Dolby Atmos.
Realtek Audio Console
You can confirm and change the audio configuration using the Realtek
Audio Console. To launch the Realtek Audio Console:
Click Start -> All apps -> Realtek Audio Console
Main
When you launch the Realtek Audio Console, the Main tab shows all
available Playback and Recording devices. You can adjust the volume and
switch to related setting pages by clicking the
icon in this tab.
Speakers/Headphones
This tab allows you to set Main Volume, Sound Effects, Default Format and
Speaker configuration.
Click the Auto Test button at the bottom of this tab to confirm the
internal speakers or the headphone sound is coming from the right
direction.
Microphone Array/External Microphone
This tab allows you to set Main Volume, Microphone Effects and Default
Format.
If the microphones are not built in, you can connect an external microphone
instead.
Device advanced settings
This tab allows you to choose the type of headphone or microphone and
select devices when an external device is plugged in.
To choose the type of headphone or microphone, do the following:
1. Plug a headphone or microphone into the headphone/microphone
jack.
2. Click the Device advanced settings tab.
3. Select one from the device list under ANALOG for the device you
plugged into.
When an external headphone is plugged in, you can turn on/off the multi-
stream function under Playback Device in this tab.
To use multi-stream function, do the following:
User's Manual
4-30
To Next Page
Loading...
Need help?
General