Dynacord A112A User Manual

A 112A | A 115A | A 118A
16
3 Appendix / Anhang
3.1 Specifications / Spezifikationen
Device in rated condition, DSP flat, amplifier load 8 ohms, dual channel, mains voltage 230 V/50 Hz, unless otherwise specified.
Property A 112A A 115A A 118A
Order No. 230 V:
F01U270188 (A112A-230V)
120 V:
F01U275161 (A112A-120V)
230 V:
F01U270189 (A115A-230V)
120 V:
F01U275163 (A115A-120V)
230 V:
F01U270190 (A118A-230V)
120 V:
F01U275164 (A118A-120V)
Cabinet Powered two-way full-range
speaker, 12“ woofer, 1.5“ compres-
sion driver, vented design
Powered two-way full-range
speaker, 15“ woofer, 1.5“ com-
pression driver, vented design
Powered subwoofer 1 x 18“, vented
design
Maximum Amplifier Output Capability, IHF-A 500 W 400 W
Amplifier Power RMS 420 W 305 W
Output Stage Topology, amplifier Class D
Max. SPL 1 m / calc. 121 dB 124 dB 123 dB
Frequency Range (-10 dB) 55 Hz to 17 kHz 50 Hz to 17 kHz 40 Hz to 130 Hz
Frequency Response (-3 dB) 65 Hz to 16 kHz 60 Hz to 16 kHz 50 Hz to 100 Hz
Nominal Coverage Angle (Horizontal x Vertical) 90° x 50° Omnidirectional
Audio Input (LINE 1 or MIC/LINE 2) INPUT 1: XLR and 1/4“ TRS combination
INPUT 2: XLR and 1/4“ TRS combination
INPUT: XLR and 1/4“ TRS combination
Audio Input (AUX) Stereo RCA, unbalanced -
Audio Output (LINK OUTPUT) XLR, balanced
Digital Signal Processing 28/56-Bit, 48 kHz
Crossover Frequency 1.7 kHz 100 Hz
Switchable Phase (Polarity) - - 0°, 180°
LF Transducer 1 x EVS-12K, 305 mm (12“),
F01U250937
1 x EVS-15K, 381 mm (15“),
F01U250940
1 x EVS-18K, 457 mm (18“),
F01U250964
HF Transducer DH-1K, 39 mm (1.5“), titanium diaphragm compression driver,
F01U250928
-
Power Requirement 230 V:
220 to 240 V AC, 50 to 60 Hz, 0.6 A, IEC inlet
120 V:
100 to 120 V AC, 50 to 60 Hz, 1.0 A, IEC inlet
Safety Class I
Operating Temperature Range 0 °C to 40 °C
Dimensions (W x H x D) 607 mm x 362 mm x 340 mm 708 mm x 432 mm x 382 mm 661 mm x 507 mm x 574 mm
Net Weight 16.8 kg 22.5 kg 31.3 kg
Shipping Weight 21.9 kg 28.4 kg 40.1 kg
Enclosure Material 15-mm Multi-ply wood
Finish Textured paint
Grille 18-GA steel with black powder coat
Handles 12 2
Optional Accessories
Dust Cover SH-112A: F01U270395 SH-115A: F01U270396 SH-118A: F01U270397
VPM 1500, variable speaker pole F01U141047
BS 35, speaker stand F01U141046

Dynacord A112A Specifications

General

Brand	Dynacord
Model	A112A
Category	Speakers
Language	English