42
L OUDSPEAKERS
F5
The F5 is a compact, but yet high-efficiency subwoofer system. An EV
DL15Y woofer works in the optimally vented cabinet, ensuring highest
power handling, efficiency and low distortion. The integrated passive
PowerMax x-over (x-over frequency 160Hz) features a parallel output and
an additional crossover output offering trouble-free parallel or x-over
operation when combined with professional full-range or Mid-Hi cabinets.
Reliably protecting the woofer against critical peak levels and thermal
overload are a thermal breaker and professional halogen lamps. The 4-pole
SPEAKON-type connectors wired-through, allowing active system installa-
tions that employ DYNACORD system power amps PM2600 or Xa2600 for
instance can be set up using 4-pole SPEAKON-type cables, without the risk
of inadvertent mismatching. Four extremely robust castors are located on
the cabinet’s rear and four ergonomically optimised recessed handles facili-
tate handling and transportation. Frontal protection is provided through a
robust steel grille that is covered with acoustic foam.
F150
A professional 15" 2-way cabinet offering optimal sound, low weight and
an outstanding price-performance ratio – that was the challenge for our
engeneering. A sound pressure level of 102 dB, wide coverage and its
excellent sound quality make the F150 equally suitable to be employed as
full-range cabinet or as Mid-Hi component in active 2-way applications
offering an convincingly natural reproduction of vocals. An Electro-Voice
DL15Y 15" speaker serves a s woofer system.
An Electro-Voice DL12 ST 12" speaker serves as woofer system while an
Electro-Voice DH2T driver with titanium diaphragm and HT94 Constant
Directivity horn provides exceptionally powerful mid-range sound and
crystal-clear trebles. The newly designed frequency x-over is equipped with
halogen lamps and thermal-breakers, which provide reliable protection
against overload. The system-switch on the connection board allows easily
configuring the F150 for full-range operation or connection to DYNACORD
system power amps like the PM 2600 or Xa2600. Frontal protection is
provided through a robust steel grille that is covered with acoustic foam.
The carrying handles are prepared for retrofitting a TÜV-approved rigging-
kit to allow trouble-free “flying” applications.
To Next Page
Loading...
Need help?
General
