Need help?Do you have a question about the Dynacord PowerSub 312 and is the answer not in the manual?
Details the process of unpacking the product and the warranty registration procedures.
Provides guidance on placing the subwoofer and establishing electrical and signal connections.
Details L/R inputs, parallel outputs, and the SIGNAL/CLIP indicators on the control panel.
Explains the X-OVER frequency switch and the SUB LEVEL volume control.
Details the satellite speaker outputs and the external subwoofer output connector.
Describes the power ON/OFF switch and the PowerCon MAINS IN connector.
Details the process of unpacking the product and the warranty registration procedures.
Provides guidance on placing the subwoofer and establishing electrical and signal connections.
Details L/R inputs, parallel outputs, and the SIGNAL/CLIP indicators on the control panel.
Explains the X-OVER frequency switch and the SUB LEVEL volume control.
Details the satellite speaker outputs and the external subwoofer output connector.
Describes the power ON/OFF switch and the PowerCon MAINS IN connector.
General| Type | Active Subwoofer |
|---|---|
| Enclosure Material | Plywood |
| Enclosure Type | Bass-reflex |
| Output Connectors | XLR |
| Driver Size | 12 inches |
| Weight | 22.5 kg |
| Input Connectors | XLR |
| Crossover Frequency | 80 Hz - 120 Hz |
To Next Page
