Dynacord SUB 1.18 User Manual

Features:
• Power Handling Rated 500 W / 8 Ohms
Peak 2000 W
• 18‘‘ EVS-18S LF Transducer
• Integrated Low Pass Filter
• 97 dB Sensitivity, 130 dB Maximum SPL
• Pole Mount to elevate a Loudspeaker
• Mounting Points to attach optional WK-C18
Wheel Kit
Technische Informationen
Engineering Data Sheet
Sub 1.18
1 x 18“
Subwoofer
Wir weisen ausdrücklich darauf hin, dass bei
gehängten Lautsprecherboxen die einschlägigen
Sicherheitsbestimmungen zu beachten sind. Es
muss unbedingt qualifizierte Fachberatung in
Anspruch genommen werden!
We expressly point out that the relevant safety
regulations must be observed for “flying”
loudspeaker systems. It is imperative that quali-
fied expert advice is sought.
Sub 1.18
Order No. F01U165095
Cabinet Subwoofer
Configuration Vented - Direct Radiator
Nominal impedance 8 Ohms
Minimum Impedance 6.7 Ohms
Rated Power RMS 500 W
Peak Power 2000 W
Sound pressure level
SPL 1 W / 1 m 97 dB
Max. SPL 1 m (calculated
with peak power)
130 dB
Frequency Range (-10 dB) 38Hz to 250 Hz
Nominal Coverage Angle
(Horizontal x Vertical)
Omnidirectional
LF Transducer EVS-18S, 18‘‘ (457 mm) Driver
Connectors 2x Neutrik Speakon NL4
Sub 1+ / 1-
Wired Through 2+ / 2-
Dimensions (W x H x D) 508 mm x 763 mm x 595 mm
(20.0“ x 30.0“ x 23.4“)
Net Weight 38.7 kg (85.3 lbs)
Shipping Weight 42.5 kg (93.7 lbs)
Enclosure material MDF with D-PUR PLUS
Grille Steel, Black Finish with Acoustic Gauze
Warranty 5 years
Optional Accessories
WK-C18 F01U169672
Spare Parts
LF Transducer F01U105741

Dynacord SUB 1.18 Specifications

General

Brand	Dynacord
Model	SUB 1.18
Category	Subwoofer
Language	English