Mains switch to power ON/OFF the unit. The mains switch lights when the PowerSub 315
is powered on and operational. If, after power on, the switch does not light, make sure the
mains cord is correctly plugged in and locked in place. If the cord is correctly connected
and operation is still not possible, contact your dealer.
Mains connection is realized through a PowerCon-type socket. A 5m mains cord with
PowerCon-type plug is supplied. When inserting the PowerCon-type plug into the socket,
the plug has to be locked in place by a quarter-turn in clockwise direction. To unplug
the mains cord, pull the plug’s chrome-plated clip with your thumb and turn the plug
counterclockwise by a quarter-turn.
To Next Page
Loading...
Need help?
General
