Dynacord VL 122 User Manual

Technische Informationen
Architects and engineers
specications
VL 122
12“ / 1.4“
2-Way Professional
Speaker System
Wir weisen ausdrücklich darauf hin, dass bei
gehängten Lautsprecherboxen die einschlägigen
Sicherheitsbestimmungen zu beachten sind. Es
muss unbedingt qualizierte Fachberatung in
Anspruch genommen werden!
We expressly point out that the relevant safety
regulations must be observed for „ying“
loudspeaker systems. It is imperative that quali-
ed expert advice is sought.
Features:
. High-Power Multi-Functional 2-Way
Cabinet
. 400W 8 Ohms
. Rotatable CAD-optimized 90° x 45°
Constant Directivity Horn
. Switchable to Biamped Mode
. Neodymium ND6 Driver
. DND 12350 Woofer
. Voice Coil Tracking Protection
Specifications
TYPE / NAME VL122
Order No. D 113 103
Cabinet Full-Range
Configuration Passive 2-Way
Switchable to biamped mode
Nominal impedance 8 Ohms
Rated power RMS 400 Watts
Program power 800 Watts
Peak power 1600 Watts
SPL 2,83 V / 1m 1W / 8 Ohm 99 dB
Max. SPL 1m
(calculated with peak power)
131dB
Frequency range ( -10dB )
Full range 60Hz - 20kHz
Frequency range ( -10dB ) 50Hz - 20kHz
measured with H5000-RCM26 preset
Coverage angle 1 kHz -6dB 90° * 45°
Passive crossover frequency 1.5kHz
Active crossover frequency
1.5kHz 24dB/Oct. Linkwitz-Riley,
1,5kHz Linear-Phase FIR
Voice coil tracking protection Yes
Component HIGH Electro-Voice ND6-8 Neodymium
Order No. 361493
Component LOW DND 12350
Order No. 366559
Connectors Full-Range 1+, 1-
Wired through 2+, 2-
Connectors Biamped Lo 1+, 1- Hi 2+, 2-
Wired through 1+, 1-, 2+, 2-
Connector model Speakon 2x NL4 MPR
Dimensions (WxHxD)
385x715x374mm
(15.13" x 28.15" x 14.72")
Net weight 24kg (52.91 Ibs)
Shipping weight 26kg (57.31 Ibs)
Enclosure material Birch plywood
Finish Black, 2-component paint
Grille Powder coated steel, acoustic foam
Handles
2
Warranty 36 Months
Optional Accessories
SH-VL122 Dust-Cover D113118
MB 122 UMH Mounting Bracket D113114
RMA Rotatable Mounting Kit D112807
TMA Tilt angle for MB122 UMH D112815
TC-02 Truss clamp D112808
FB-VL122 Flying Bracket D113111
TC-TV Truss Clamp > TV Spigot D112941
PM-TV Pole Mount > TV Spigot D112942

Dynacord VL 122 Specifications

General

Brand	Dynacord
Model	VL 122
Category	Speaker System
Language	English

Summary

Technical Information

Specifications

Detailed technical parameters including impedance, power, SPL, frequency response, and components.

Optional Accessories

List of available mounting hardware and protective covers for system configuration.

Description

Dimensions

Detailed physical measurements of the speaker system in millimeters and inches.

Performance Graphs

Circuit Diagram

Schematic representation of the internal electronic circuitry for the speaker system.

Company Contact Information